rotary machine
英 [ˈrəʊtəri məˈʃiːn]
美 [ˈroʊtəri məˈʃiːn]
网络 轮转机; 旋转机
双语例句
- Faults Diagnosis of the Running-up Process of a Rotary Machine Based on HMM with Mixture Probability Densities
混合密度连续HMM在旋转机械启动过程故障诊断中的应用 - Furthermore, the application program can also send operation commands and data to control the actuator ( driving element) on the rotary machine according to the analysis result.
根据分析结果，也可以由应用程序发出相应操作命令和数据，对旋转件上的激励元件进行反馈控制。 - The utility model has the advantage of easy operation and is a rotary machine for feeding sulphur with good gum solidifying effect in shoe making industry.
本实用新型易操作，实用性强，是提供制鞋行业一种固胶效果佳的回旋式加硫机。 - Measurement of rotational speed of rotary machine based on MSP430 micro-controller unit
基于MSP430单片机的旋转机械转速测量 - Current Technique Application Situation of Returning Total Wheat Straw to Soil by Rotary Machine and Extension Countermeasures
麦秸全量机械旋耕还田技术的应用现状及推广对策 - The holospectrum is spectrum analysis that the phase, amplitude and frequency are synthesized, and is one of strongly tools to diagnosis the rotary machine.
全息谱是综合相位、幅值和频率信息的一种谱分析技术，是进行旋转机械状态监测与故障诊断强有力的工具之一。 - The paper discusses in short the development of network connected on-line monitoring and failure diagnosis systems of large rotary machine equipment in modern industrial enterprises, including technical features and trend of development.
该文简要分析了现代工业企业大型旋转机械设备自动系统网络化在线监测与故障诊断系统的发展、技术特点和发展趋势。 - In this thesis, the common signal handling technology in failure diagnosis of the rotary machine has been discussed. Principle and application of the wavelet technology has been expounded.
本文简要地讨论了旋转机械故障诊断领域常用的信号处理技术，阐述了小波技术的原理与应用方法。 - Research on the Dynamic Torque Non-contact Measurement of Rotary Machine
回转机械动态扭矩非接触测量的研究 - Research on Torque Real Time Monitoring System of Rotary Machine
回转机械扭矩实时监测系统的研究 - The application of network communications technology in On-line Monitoring and Fault Diagnosis System of Large Unit Rotary Machine is studied in this paper.
本文讨论了网络通信技术在大型旋转机械在线监测及故障诊断系统中的应用。 - Ro to r vibration in rotary machine is one of the usual troubles.
旋转机械中转子振动是最常见的故障之一。 - By dynamic measuring the torque of the rotary machine, the work condition could be real time monitoring.
对回转机械设备扭矩进行动态测量，可以实现工况实时监控。 - Application of rough set theory on fault diagnosis of the rotary machine
粗糙集合理论在旋转机械故障诊断技术中的应用 - Online Surveillance and Diagnose Network System for Large Rotary Machine Set
大型回转机械实时在线监测和故障诊断网络系统的研制 - Analysis of shafts misalignment fault in rotary machine
旋转机械轴系不对中故障分析 - Non-contact measurement of rotary machine is realized. It provides a foundation for rotating shaft dynamics monitoring intelligence and automatization.
实现了回转机械扭矩非接触测量，为转轴动力监测智能化、自动化奠定了基础。 - The design of online real-time inspecting system for large-scale rotary machine was discussed.
讨论了大型旋转机械检测系统的机械系统和实时监测系统的设计，提出了一种对于大型旋转机械状态监测系统的高速数据采集实用的解决方案。 - An experimental system for investigating active "gas anti swirl" vibration control of a rotary machine.
介绍一个用于旋转机械振动“气体反旋流”主动控制试验研究的系统。 - Research on intelligent maintenance unit of rotary machine
旋转机械智能维护单元设计研究 - Based on the real field engineering of large-scale rotary machine, the paper sets up a spatial rotor's diagnosis model through a three hierarchical information fusion of data level and character level and decision level, a compressor unit using the diagnosis model is diagnosed.
根据大型回转机械现场实际，采用数据层、特征层和决策层3层次的混合信息融合技术，建立了空间转子诊断模型，并利用该诊断模型对某大型压缩机组进行了故障诊断。 - ? Measurement of torsional vibration is important for fault detecting and diagnosis of rotary machine.
扭振测量对旋转机械故障监测与诊断有重要意义。 - The main researching content of data acquisition system on chip is to analyze the engine on the basis of the vibration signal of the large rotary machine or air-pressing machine in workshop.
片上数采系统研究的主要内容是根据测量车间的发电机组或空压机等大型旋转机械的振动信号对设备进行分析。 - The results can be reference to the qualitative analysis and quantitative study to the bending character of a complex shaft system coupling vibration of the rotary machine.
分析结果为研究旋转机械复杂转子系统耦合振动中弯振特性的定量、定性分析提供了依据。 - This thesis makes some research on visualizing faults diagnosis and vibration forecast of rotary machine, integrates them and builds a visualized fault diagnosis and forecast system of the rotary machine.
鉴于此，本文重点研究了可视化的故障诊断方法，以及旋转机械的振动预测的方法，并将二者有机地结合起来，建造一个旋转机械的可视化故障诊断和预测系统。 - The dynamic torsion process of the rotary machine is analyzed, and a dynamic torque measurement model of the rotary machine based on transfer function is built up by transfer matrix method. The model foundation of dynamic torque measurement is provided.
分析了回转机械动态扭转过程，利用传递矩阵法建立起一种基于传递函数的回转机械动态扭矩测量模型，为动态扭矩测量提供了一种模型依据。 - A special data acquisition system is required during researching on the rotary machine, such as the aeroengine rotor.
在航空发动机转子等旋转部件的试验研究过程中，迫切需要一种能够获取旋转部件上各种参数的数据采集系统。 - Bearings are key components of rotary machine equipment. And the rolling would be used more in medium and low speed condition or in the case of the hydraulic system out of commission.
轴承是旋转机械装备的关键部件，且在中低速和无法使用液压系统的情况下多采用滚动轴承。 - A lot of faults of rotary machine are related to rolling bearings.
旋转机械的许多故障都与滚动轴承有关。 - Some ground machine transport rolls, lifts and rotary machine are also controlled by frequency conversion motor.
地面机运的部分滚床、升降滚床以及旋转滚床的电机也采用变频控制。